- Controls the boost fan
- Controls the Central heating pump
- Measure the temperature of the boiler (ch)
- Supports economical AirFlow combustion mode (up to 30% fuel savings)
- Supports room thermostat
- Supports flue gas sensor
The DomAvtomatika ECO100 controller is not just a controller for a semi-automatic boiler — ECO100 is a Russian highly reliable equipment that allows the user to get the maximum fuel economy on their boiler, operating comfort and safety.
Fuel savings of up to 30% are thanks to the airflow fuel burning algorithm developed by DomAvtomatika engineers. when the boiler does not go into stop mode and does not overheat, the algorithm calculates and supplies the amount of air to the furnace to maintain the temperature of degrees in degrees.
Because of the complete combustion of fuel, the walls of the water jacket remain clean of soot growths, and the heat exchanger needs to be cleaned much less often.
The AirFlow algorithm prevents the accumulation of carbon monoxide in the furnace, thanks to the air supply, the gas successfully burns out and the boiler can be opened without fear of burns.
The controller has a service menu with engineering settings, is unpretentious to the quality of the power grid in villages and cottage settlements, and is easy to use — it was designed for the Russian user for harsh operating conditions.
The wires remain soft and do not break even at low temperatures, this is done because we know how different the winters in Russia and Poland are.
The membrane keyboard can withstand 1 million clicks and protects the inside of the device from dust and dirt.
The interface is designed so you can easily understand the device when there is no documentation at hand.
|Overall dimensions (excluding wires), mm||170×50×50|
|Controller weight, kg, not more||0,5|
|Temperature setting range of the Central heating system, ° C||45-85|
|Supply voltage, V||230 ±5%|
|Power consumption, VA, max||5|
|Climatic version according to GOST 15150||UHLZ.1|
|Operating Temperature, °C||-10..+40|
|Maximum output power of the “pump ch” channel, W||100|
|Maximum output power of the channel «Ventilator», W||400|